Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorPaitoon Boonsongen_US
dc.contributor.authorPimpilai Wannasuten_US
dc.contributor.authorAnucha Watcharapasornen_US
dc.identifier.citationChiang Mai Journal of Science 47,4 (Special Issue II : July 2020), p.654-664en_US
dc.descriptionThe Chiang Mai Journal of Science is an international English language peer-reviewed journal which is published in open access electronic format 6 times a year in January, March, May, July, September and November by the Faculty of Science, Chiang Mai University. Manuscripts in most areas of science are welcomed except in areas such as agriculture, engineering and medical science which are outside the scope of the Journal. Currently, we focus on manuscripts in biology, chemistry, physics, materials science and environmental science. Papers in mathematics statistics and computer science are also included but should be of an applied nature rather than purely theoretical. Manuscripts describing experiments on humans or animals are required to provide proof that all experiments have been carried out according to the ethical regulations of the respective institutional and/or governmental authorities and this should be clearly stated in the manuscript itself. The Editor reserves the right to reject manuscripts that fail to do so.en_US
dc.description.abstractThe article details the solid-state synthesis of Nd-123 powder under a normal air atmosphere using a stoichiometric ratio (i.e. Nd:Ba:Cu = 1:2:3) of high-purity Nd2O3, BaCO3 and CuO starting powders. The as-calcined powder was analyzed using thermo-analytical (DSC/TGA) techniques. The exotherm was related to the formation of Nd-123 which occurred around 850-920C and, thereafter, the sample melted. The calcination process of Nd-123 compound was carried out by heating the starting precursors at 800-950C for 12 h. Phase identification was determined using an X-ray diffractometer (XRD) and the quantitative phase analysis was performed by fitting the XRD pattern using the GSAS-II program. The morphology was observed by scanning electron microscopy (SEM) with chemical composition identification from EDS mode. The result of XRD showed that NdBa2Cu3Oy (Nd-123) was identified as the main crystalline phase along with other minor secondary phases when the calcination temperature was 900C. The approximated stoichiometry of the powder was Nd:Ba:Cu = 1:2.09:3.16, which was very close to the expected nominal composition. Therefore, the calcination temperature at 900C was selected for further synthesis study by varying the calcination time (12, 18, 24 and 30 h). Particle size analysis indicated that the powders were consisted of irregular-shaped particles linked together to form agglomerates. The particle size tended to increase with increasing time of calcination process with a size range from 1.160.33 μm to 31.72 9.27 μm. The result of fitting the XRD pattern showed that the sample re-calcined at 900C for 24 h exhibited increased weight fraction of Nd-123 with minimized concentration of secondary phases.en_US
dc.publisherFaculty of Science, Chiang Mai Universityen_US
dc.subjectlayered perovskiteen_US
dc.subjectthermo analytical methoden_US
dc.subjectsolid-state synthesisen_US
dc.subjectquantitative phase analysisen_US
dc.titleEffect of Calcination Condition on Phase Formation Characteristics of NdBa2Cu3Oy Powder Prepared by Solidstate Reactionen_US
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.

Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.