Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorWatsaka Siriangkhawuten_US
dc.contributor.authorSomkid Penchareeen_US
dc.contributor.authorKate Grudpanen_US
dc.contributor.authorJaroon Jakmuneeen_US
dc.description.abstractA cost-effective sequential injection monosegmented flow analysis (SI-MSFA) with anodic stripping voltammetric (ASV) detection has been developed for determination of Cd(II) and Pb(II). The bismuth film working electrode (BiFE) was employed for accumulative preconcentration of the metals by applying a fixed potential of -1.10 V versus Ag/AgCl electrode for 90 s. The SI-MSFA provides a convenient means for preparation of a homogeneous solution zone containing sample in an acetate buffer electrolyte solution and Bi(III) solution for in situ plating of BiFE, ready for ASV measurement at a flow through thin layer electrochemical cell. Under the optimum conditions, linear calibration graphs in range of 10-100 μg L-1of both Cd(II) and Pb(II) were obtained with detection limits of 1.4 and 6.9 μg L-1of Cd(II) and Pb(II), respectively. Relative standard deviations were 2.7 and 3.1%, for 11 replicate analyses of 25 μg L-1Cd(II) and 25 μg L-1Pb(II), respectively. A sample throughput of 12 h-1was achieved with low consumption of reagent and sample solutions. The system was successfully applied for analysis of water samples collected from a draining pond of zinc mining, validating by inductively coupled plasma-optical emission spectroscopy (ICP-OES) method. © 2009 Elsevier B.V. All rights reserved.en_US
dc.titleSequential injection monosegmented flow voltammetric determination of cadmium and lead using a bismuth film working electrodeen_US
article.volume79en_US Mai Universityen_US Rajathanee Universityen_US
Appears in Collections:CMUL: Journal Articles

Files in This Item:
There are no files associated with this item.

Items in CMUIR are protected by copyright, with all rights reserved, unless otherwise indicated.